BS EN ISO 14122-1:2016 gives general requirements for access to stationary machines and guidance about the correct choice of means of access when necessary access to the stationary machine is not possible directly from the ground level or from a floor.
Buy bs en iso 14122-3: 2016 safety of machinery - permanent means of access to machinery - part 3: stairs, stepladders and guard-rails (iso 14122-3:2016) from sai global.
DIN EN ISO 14122-3/A1:2010 Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails - Amendment 1 (ISO 14122-3:2001/Amd 1:2010); German version EN ISO 14122-3:2001/A1:2010 (Foreign Standard) This standard applies to all machinery (stationary and mobile) where fixed means of access are necessary.
ISO 14122-1:2016
ISO 14122-3:2016(E) 3.1 stairs step ladders succession of horizontal levels — steps (3.1.11) and landings (3.1.5) — allowing passage on foot from one level to another Note 1 to entry: Stairs/step ladders are composed of the elements shown in Figure 1 and defined in 3.1.1 to 3.1.16.
Abstract Preview
ISO 14122-1:2016 gives general requirements for access to stationary machines and guidance about the correct choice of means of access when necessary access to the stationary machine is not possible directly from the ground level or from a floor.
It is applicable to permanent means of access which are a part of a stationary machine, and also to non-powered adjustable parts (e.g. foldable, slidable) and movable parts of fixed means of access.
NOTE 1 'Fixed' means of access are those mounted in such a manner (for example, by screws, nuts, welding) that they can only be removed by the use of tools.
ISO 14122-1:2016 specifies minimum requirements that also apply when the same means of access is required as the part of the building or civil construction (e.g. working platforms, walkways, ladders) where the machine is installed, on condition that the main function of that part of the construction is to provide a means of access to the machine.
NOTE 2 Where no local regulation or standards exist, this part of ISO 14122 can be used for means of access which are outside the scope of the standard.
It is intended that this part of ISO 14122 be used with a relevant access-specific part of ISO 14122.
The ISO 14122 series as a whole is applicable to both stationary and mobile machinery where fixed means of access are necessary. It is not applicable to powered means of access such as lifts, escalators, or other devices specially designed to lift persons between two levels.
ISO 14122-1:2016 is not applicable to machinery manufactured before the date of its publication.
For the significant hazards covered by this part of ISO 14122, see Clause 4.
General information
Iso 14122 Pdf
Publication date : 2016-06
Number of pages : 10
:
ICS :
Buy this standard
CHF58
Life cycle
A standard is reviewed every 5 years
10
Proposal
30
40
50
60.60
Publication
90
Revisions / Corrigenda
Previously ISO 14122-1:2001 ISO 14122-1:2001/Amd 1:2010
Now ISO 14122-1:2016
+41 22 749 08 88
Opening hours: Monday to Friday - 09:00-12:00, 14:00-17:00 (UTC+1)
Keep up to date with ISO
Bs En Iso 14122-3
Sign up to our newsletter for the latest news, views and product information.
Status: Gällande
Maskinsäkerhet - Fasta konstruktioner för tillträde till maskiner - Del 1: Val av fasta konstruktioner för tillträde mellan två nivåer (ISO 14122-1:2016)
Prenumerera på standarder med tjänst SIS Abonnemang. Genom att prenumerera får du effektiv åtkomst till gällande standarder och säkerställer att ditt företag alltid har tillgång till senaste utgåvan.Läs mer om SIS Abonnemang
Prenumerera på standarden - Läs merDölj
PDF
Papper
En Iso 14122-4
+
PDF + papper
En Iso 14122-4
Fler alternativFärre alternativ
This part of ISO 14122 gives general requirements for access to stationary machines and guidance about the correct choice of means of access when necessary access to the stationary machine is not possible directly from the ground level or from a floor.It is applicable to permanent means of access which are a part of a stationary machine, and also to non-powered adjustable parts (e.g. foldable, slidable) and movable parts of fixed means of access.NOTE 1 “Fixed” means of access are those mounted in such a manner (for example, by screws, nuts, welding) that they can only be removed by the use of tools.This part of ISO 14122 specifies minimum requirements that also apply when the same means of access is required as the part of the building or civil construction (e.g. working platforms, walkways, ladders) where the machine is installed, on condition that the main function of that part of the construction is to provide a means of access to the machine.NOTE 2 Where no local regulation or standards exist, this part of ISO 14122 can be used for means of access which are outside the scope of the standard.It is intended that this part of ISO 14122 be used with a relevant access-specific part of ISO 14122.The ISO 14122 series as a whole is applicable to both stationary and mobile machinery where fixed means of access are necessary. It is not applicable to powered means of access such as lifts, escalators, or other devices specially designed to lift persons between two levels.This part of ISO 14122 is not applicable to machinery manufactured before the date of its publication.For the significant hazards covered by this part of ISO 14122, see Clause 4.